3d printer bed level test beep1/25/2024 We suggest that you adjust the wiping nozzle parameters or disable the function in the slicing software when dealing with the model retraction. Please kindly inspect the fastening condition of the screws on the machine platform, and tighten them if any looseness is found.2. Root causeļ¼ The Z-axis tray fixing screw is not tightened properly, resulting in looseness. During high-speed printing, the edges of the 3D-printed model may become distorted. If you find any loose or disconnected wires, Or if it's plugged in but it persists, carefully reconnect them to their respective ports. Ensure that the connection wires are securely plugged in and not loose or disconnected. Please inspect the connections between the nozzle adapter board and the hotend sideboard. To address this issue, we kindly request that you perform the following steps while powered off The problem of the printer showing zero degrees on both the hotend and heated came from a communication failure from the motherboard to the hotend adapter board. K1 showing 0 on both temperatures (Nozzle and Hotbed).
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |